

TUBE ENX
Heavy-duty use, high-efficiency LED tube with an anodised heat sink made of pure 1060 aluminium. Made with a high-efficiency LED
This type of tube is compatible with a wide range of electronic ballasts (check compatibility, due to differences in internal construction of the ballast)
Easy and quick replacement, opal, clear or striped cover
No rewiring of the luminaire, rotating sleeves
The luminaire remains compatible with fluorescent tubes
The safety certification of the luminaire remains valid
Ballast now consumes <0.5W
Requires use of LED starter/fuse
Available with lateral connection, no starter or fuse required, ballast is eliminated, rewiring required
Body: Aluminium injection
Diffuser: Frost or transparent
Fixing: G13
Inclination: —
LED module: SMD High Efficiency
Opening: —
Surface colour: —
Protection rating IP: 40
Protection rating IK: 09
Use: Indoor
LED type: EPISTAR
Luminaire efficacy: 120lm/W
Colour temperature: 2.700 – 6.000K
CRI: ≥80Ra
Lifetime L70 Tj.55°: 50.000h
Working temperature: From -20ºC to +40ºC
Output: <0,5%
Downward Light Output: >99%
Lenses: Frost or transparent
Insulation: Class II
Supply voltage: 85-265Vac
Frequency: 50/60Hz
Power factor: >0,95
Driver: LIFUD
Disconnection: Manual with tools
Regulation: 1-10V – DALI – SmartLuxe Self Dimming
Surge protection: —